Heat Bed MK2B R1 Red
This heatbed is designed to be compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed. This heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources. It features a central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity. Additionally, the solder pads have been greatly increased in size, making it much easier and allowing for the use of 1206 surface mount components. But this does not remove the need to use proper strain relief.
Come with resistor and LEDs soldered, basic soldering skills needed to solder the power wire
Dimensions (Outer): 214mm x 214mm
Dimensions (Heat Bed): 200mm x 200mm
Laminate FR4 1.6¡À0.15mm
2 Layer, 35¦Ìm Copper
Power Input: 12V / 24V DC
Copper Plated Holes
Very good in combination with RUMBA or Taurino Power
Kuongshun Electronic, one of the international well-known manufacturers and suppliers of heat bed mk2b r1 red which is situated in China, now has quality products for sale. We are equipped with a group of professional and experienced workers, as well as advanced equipment. You can rest assured to buy discount and low price heat bed mk2b r1 red made in China from us and check the pricelist with us.