Introduction To ARDUINO NANO V3.0 Specifications

- Aug 31, 2018-

Nano V3.0 FT232RL mega328P 5V 16M USB Micro-Controller Board for Uno R3 Nano with Mini USB Cable

WHAT IS THE ARDUINO NANO V3.0? 

Arduino Nano is a small board compatible with breadboards which is compatible with ATMega328. It has comparable usefulness to the Arduino Uno, however, when it comes to DIP module package, it works with a Mini-B USB link. This Arduino clone board is superbly compatible with Arduino IDE and cases.

ARDUINO NANO V3.0 SPECIFICATION

The Arduino Software (IDE), is used to program Arduino Nano. The Arduino Software is an Integrated Development Environment that is common to all Arduino boards and runs both online and offline. 

The detailed specification of the Arduino Nano board is as follows:

Microcontroller ATmega328 

Operating Voltage (logic level): 5 V 

Input Voltage (Recommended): 7-12 V 

Input Voltage (limits): 6-20 V 

Digital I/O Pins : 14 (of which 6 provide PWM Output) 

Analog Input Pins: 8 

DC Current per I/O Pin: 40 mA 

Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader 

SRAM: 2 KB (ATmega328) 

EEPROM: 1 KB (ATmega328) 

Clock Speed: 16 MHz 

Measurements: 0.73" x 1.70" 

POWERING UP THE ARDUINO NANO 

The Arduino Nano can be powered by means of the Mini-B USB, 6-20V unregulated external power supply (stick 30), or 5V regulated external power supply (stick 27). The power source is automatically chosen to the highest voltage source.


Find more Arduino products to inspire your creativity, please click:http://www.kuongshun-ks.com/uno/ Or https://kuongshun.en.alibaba.com/

Previous:Limits of the Raspberry Pi Next:Arduino Vs. Raspberry Pi: Which Is The Right DIY Platform For You?