2.9 inch Black+White Two Color E-paper ink Screen Supports Partial
Refresh SPI Interface for Raspberry Pi
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
296x128, 2.9inch E-Ink display module, SPI interface
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Operating voltage: 3.3V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 89.5mm × 38mm
Display size: 66.89mm × 29.05mm
Dot pitch: 0.138 × 0.138
Resolution: 296 × 128
Display color: black, white
Grey level: 2
Refresh power: 26.4mV(typ.)
Standby power: <0.17mV
Viewing angle: >170°
2.9 inch e-Paper Module x1
XH2.54 20cm 8Pin x1