IR Remote Control Switch Power Button Module for RPi Raspberry Pi 3 Model B B+ Zero
Wireless infrared remote control power switch for Raspberry Pi development board
One key to control the power on/off with indicator indicating the working status
Sending a shutdown signal to the Raspberry if the Shutdown Button is pressed Powering off the Raspberry after save shutdown avoiding the system crash
Board Size: 65 X 30 X 20mm/2.56 X 1.18 X 0.79inch(L*W*H)
Ship out by e-packet with tracking information and 7-17 days delivery time usually
As everyone at some point will recognize the Raspberry Pi doesn't include any kind of shutdown button.
So the only way to power it off is by unplugging it from the power supply.
To make sure you get no corruption of your data files on the SD card you should shutdown the
Raspberry before powering it off.
So the whole procedure can be a bit annoying especially if you want to use the Raspberry as some kind of embedded PC . e.g. a media server or an internet radio.
Power Button provides a small circuit that includes the features:
Sending a shutdown signal to the Raspberry if the Shutdown Button is pressed
Powering off the Raspberry after save shutdown
Powering on the Raspberry after the Button is pressed again
LED light indicating the current state: On / Shutdown / Off
Easy to setup
NOTE: Please make sure that your Raspberry Pi have 5V/2.5A power supply with this module!!!
1X Power Button For RPi Module
1X IR Remote controller(without battery)