Motor Driver TB6612FNG Module 3 PI Matching Performance Ultra L298N

Motor Driver TB6612FNG Module 3 PI Matching Performance Ultra L298N

The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).

Chat Now

Product Details

Motor Driver Module 1A TB6612FNG For-arduino Microcontroller Better Than L298N


Description:

  • The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU.

  • Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

  • Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.


Features:

  • Size: Approx. 20 x 20mm / 0.78 x 0.78 inch

  • Power supply voltage: VM=15V max, VCC=2.7-5.5V

  • Output current: Iout=1.2A(average) / 3.2A (peak)

  • Standby control to save power

  • CW/CCW/short brake/stop motor control modes

  • Built-in thermal shutdown circuit and low voltage detecting circuit

  • All pins of the TB6612FNG broken out to 0.1" spaced pins

  • Filtering capacitors on both supply lines


Package Includes:

  • 1 x Motor Driver module

  • 2 x Rows of pins


Previous:LM358 100 Times Gain Amplification Module Next:Mini 30A VNH2SP30 Monster Shield

Inquiry