TB6612FNG V1.0.0 WeMos D1 Mini I2C Dual

TB6612FNG V1.0.0 WeMos D1 Mini I2C Dual

I2C interface; I2C control or IO enable; The power supply voltage: VM = 15V maximum; Output current: Iout = 1.2A (average) / 3.2A (peak);

Chat Now

Product Details

TB6612FNG WeMos D1 mini I2C Dual Motor Driver Shield Driver Module


Features:

  1. I2C interface; I2C control or IO enable;

  2. The power supply voltage: VM = 15V maximum;

  3. Output current: Iout = 1.2A (average) / 3.2A (peak);

  4. The system power supply is independent of the motor power supply, with standby control mode, flexible control, and reduced power consumption;

  5. Support CW (clockwise) / CCW (counterclockwise) / acceleration / deceleration / fixed speed / short brake / stop control mode;


Pin description:

  • VM: motor power + (maximum 15V)

  • GND: Motor Power -

  • A1 A2: Motor A

  • B1 B2: Motor B.

  • S: Standby control port (in IO mode)

  • DIO/CLK: non-control port, new stm32 program;

  • Stanby control mode selection

  • Select I2C mode: use the I2C protocol to control the STBY of the TB6612

  • Select IO mode: use the "S" pin to control the STBY of the TB6612
    Reset mode selection

  • Short circuit: reset with d1 mini (reset at power-on or press reset button of d1 mini)

  • Disconnected: Reset by the "DTR" pin


Package included:

1PCS x For WeMos D1 mini I2C Dual Motor Driver Shield Driver Module TB6612FNG

 TB6612FNG WeMos D1

Previous:LM317 DC-DC Converter Buck Step Down Circuit Board Module Linear Regulator Adjustable Voltage Regulator Power Supply Next:TL866A Universal Programmer Support Over 13000 Chips USB Programmer With 4PCS Socket + IC Picker + Test Clip

Inquiry