TP4056 1A Lipo Battery Charging Board Micro USB
This Li-ion battery charging module is equipped with TP4056 chip ensure high charging accuracy. It support 100mA to 1000mA output current adjusting when change the onboard resistor. Provinding power input micro USB interface and solder joint, you can easier to DIY your own battery charger.
Charge module- Linear charging.
Output voltage: 4.2V.
Input interface:Micro USB.
Work temperature:-10℃to +85℃.
1X TP4056 Li-ion Battery Charging Module
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
6. NO Reveral polarity
7. Led indicator-red is charging blue is full charged
Kuongshun Electronic, one of the international well-known manufacturers and suppliers of tp4056 1a lipo battery charging board micro usb which is situated in China, now has quality products for sale. We are equipped with a group of professional and experienced workers, as well as advanced equipment. You can rest assured to buy discount and low price tp4056 1a lipo battery charging board micro usb made in China from us and check the pricelist with us.